Call for case studies and technomercials for ATMOsphere America 2019

[-] text [+]

You're invited to submit your technology case studies and technomercials with natural refrigerants for ATMOsphere America 2019 conference! 

The case studies submitted will need to be suitable to be presented in one of the new program sessions: 
  • Industrial and Commercial Refrigeration Case Studies: To be presented during the plenary sessions only alongside an end user and/or contractor. These presentations will need to highlight end user experiences and cannot be commerical in nature. Manufacturers wishing to present without an end user and/or contractor will need to submit a technomercial. 
  • Technomercials*: These presentations will highlight the technical aspects of real-life installations of natural refrigerants-based technology and will take place during parallel sessions. Your submission should include tangible data and innovative technology.
Due to limited availability, the selection process will be highly demanding. Please ensure that your submission is relevant to the North American market and includes real-life applications.

Presentation time will be approximately 10 mins + Q&A time. 50% discount on the standard conference pass will apply for accepted speakers.

Please use the submission template provided in the link below and send it to and indicate whether your preferred session is for the case studies or technomercials. Your submission will not be accepted if any other format is used. 

The deadline for submissions is March 11, 2019. Please note that submissions will be reviewed on a rolling basis and case studies might be allocated before this deadline, so early submission is recommended. 


*Technomercials are free of charge for sponsoring companies. $800 USD for non-sponsoring companies. 

ATMOsphere Conferences Case Study & Technomercial Guidelines

Submission Procedure

  • Fill out the submission template and keep it in its original format, as a Microsoft Word document. Note: You may not have some of the information required which is ok, you can make changes to your submission by simply reaching out to us.
  • Indicate which ATMOsphere Conference your submission is to in the subject line
  • Send the case studies to the communicated e-mail addresses in the call for case studies.
  • Submissions made without the template or after the deadline will not be taken into consideration.


Market Focus: Must be focused on or applicable to the market in which the conference is taking place. 

Topics: Should include HVAC&R applications with natural refrigerants (e.g. R744, R717, R718, R290, R600a, R1270) such as:

  • Commercial & light commercial refrigeration
  • Industrial refrigeration
  • Transport refrigeration
  • Air conditioning (mobile & stationary)
  • Heat pumps
  • New areas of application

Content: Submissions must include reference to the following points:

  • Sustainable: address the potential of natural refrigerant technology
  • Replicable: lessons learned that could be applied to other projects in the region
  • Original: technology innovations, research results that have not been shown elsewhere, new fields of application, etc.
  • Tangible: examples of real life installations and/or demonstration projects, laboratory testing with tangible results, etc.
  • Important: Case studies with the following elements will be treated preferentially:
Efficiency analysis: Analysis of how the refrigerant influences the Coefficient of Performance (COP), comparison of different systems or parameters, etc.

Cost analysis: energy costs, operational costs, planning and installation costs, life cycle costs

Presentation Time: Each technology case study presentation will be allotted maximum of 10-12 minutes for the presentation + 3 minutes of Q&A from the audience. Changes are possible depending on the session and the conference.  

Speaker Discount: Case study presenters are entitled to a special 50% discount on the standard conference pass. 

Still have questions? Send an e-mail to